Filter
Top Products
107
Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
5 Click the GeForce FX tab.
6 On the nView Display Mode pulldown menu, select
Clone.
7 On the Primary/Secondary pulldown menu, select
Digital
flat panel
/TV.
8 In the display box, click the
TV 1b icon.
9 Click the Device Settings settings button.
The Device Settings menu appears.
10 Select
TV format, then select 525i(480i,D1).
11 Click
Apply.
12 When the message, “Your desktop has been
reconfigured” appears, click
Yes.
13 Click
OK.
The HDTV Overscan Configuration dialog box appears.
14 Click OK.
15 Click on the display 1b to send the display out to your
TV.
16 On the Display Settings dialog box, click
OK.
You may now select single display out to TV and the output is
directed to Component Out.
If you wish to use the S-Video port for TV output, you must repeat
the procedure above, selecting M/NTSC for the TV Format in step 10.
NOTE