Toshiba F15 Personal Computer User Manual


 
66
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
The clips on either side of the memory module click to secure
the memory module.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
11 Replace the memory module slot cover and tighten the
screw.
12 Turn the computer over and restart it.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory.
If you are adding extra memory after setting up the computer,
verify that the computer has recognized it correctly as
described in “Checking total memory” on page 68.
Removing a memory module
1 Complete steps 17 in “’Installing additional memory
(optional)’” to shut down the computer and open the memory
module cover.
Do not try to remove a memory module with the computer
turned on. You can damage the computer and the device.
Do not remove the memory module while the computer
is in Standby mode. The computer could hang up the
next time you turn it on and data in memory will be lost.
In either of the above cases, the Standby configuration
will not be saved.