TRENDnet BRM504 Network Router User Manual


 
PC Configuration
25
Figure 20 - Windows NT4.0 - Add Gateway
2. The DNS should be set to the address provided by your ISP, as follows:
Click the DNS tab.
On the DNS screen, shown below, click the Add button (under DNS Service Search
Order), and enter the DNS provided by your ISP.
Figure 21: Windows NT4.0 - DNS
Broadband ADSL Router User Guide
26
Checking TCP/IP Settings - Windows 2000:
1. Select Control Panel - Network and Dial-up Connection.
2. Right - click the Local Area Connection icon and select Properties. You should see a
screen like the following:
Figure 22: Network Configuration (Win 2000)
3. Select the TCP/IP protocol for your network card.
4. Click on the Properties button. You should then see a screen like the following.
Figure 23: TCP/IP Properties (Win 2000)