TRENDnet BRM504 Network Router User Manual


 
Operation and Status
35
Connection Status - PPPoE & PPPoA
If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the following
example will be displayed when the "Connection Details" button is clicked.
Figure 27: PPPoE Status Screen
Data - PPPoE/PPPoA Screen
Connection Time
This indicates how long the current connection has been estab-
lished.
Connection to Server
This indicates whether or not the connection is currently estab-
lished.
If the connection does not exist, the "Connect" button can be
used to establish a connection.
If the connection currently exists, the "Disconnect" button
can be used to break the connection.
Negotiation
This will show the Negotiation status of the connection.
Authentication
This will show the Authentication status of the connection.
IP Address
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
Network Mask
The Network Mask associated with the IP Address above.
Buttons
Connect
If not connected, establish a connection to your ISP.
Disconnect
If connected to your ISP, hang up the connection.
Close
Close this window.
Broadband ADSL Router User Guide
36
Connection Details - Dynamic IP Address
If your access method is "Direct" (no login), with a Dynamic IP address, a screen like the
following example will be displayed when the "Connection Details" button is clicked.
Figure 28: Connection Details - Dynamic IP Address
Data - Dynamic IP address
Internet
IP Address
The current IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
Subnet Mask
The Network Mask associated with the IP Address above.
Default Gateway
The IP address of the remote Gateway or Router associated with the
IP Address above.
DNS Server
The IP address of the Domain Name Server which is currently used.
DHCP Server
The IP address of your ISP's DHCP Server.
Lease Obtained
Lease Expires
This indicates when the current IP address was obtained, and how
long before this IP address allocation (the DCHP lease) expires.
Buttons
Release
If an IP Address has been allocated to the Broadband ADSL Router
(by the ISP's DHCP Server, clicking the "Release" button will break
the connection and release the IP Address.
Renew
If the ISP's DHCP Server has NOT allocated an IP Address for the
Broadband ADSL Router, clicking the "Renew" button will attempt
to re-establish the connection and obtain an IP Address from the
ISP's DHCP Server.
Close
Close this window.