TRENDnet BRM504 Network Router User Manual


 
Advanced Features
51
Add/Edit Service
This screen is displayed when the Add or Edit button on the Services screen is clicked.
Figure 39: Add/Edit Service
Data - Add/Edit Service
Services
Name
If editing, this shows the current name of the Service.
If adding a new service, this will be blank, and you should enter a
suitable name.
Type
Select the protocol used by the Service.
Start Port
Enter the beginning of the port range used by the Service.
Finish Port
Enter the end of the port range used by the Service.
Broadband ADSL Router User Guide
52
Options
This screen allows advanced users to enter or change a number of settings. For normal opera-
tion, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Figure 40: Options Screen
Data - Options Screen
Internet
Respond to Ping
If checked, the Router will respond to Ping (ICMP) packets
received from the Internet.
If not checked, Ping (ICMP) packets from the Internet will be
ignored. Disabling this option provides a slight increase in secu-
rity.
MTU Size
Enter a value between 1 and 1500.
Note: MTU (Maximum Transmission Unit) size should only be
changed if advised to do so by Technical Support.
UPnP
Enable UPnP
UPnP (Universal Plug and Play) allows automatic discovery and
configuration of equipment attached to your LAN. UPnP is by
supported Windows ME, XP, or later.
If Enabled, this device will be visible via UPnP.
If Disabled, this device will not be visible via UPnP.
Advertisement
Period
Enter the desired value, in minutes. The valid range is from 1 to 1440.
Advertisement
Time to Live
Enter the desired value, in hops. The valid range is from 1 to 255.