TRENDnet BRM504 Network Router User Manual


 
Modem Mode
79
Status Screen
In Modem mode, the Status screen looks like the example below.
Figure 57: Status Screen - Bridge Mode
Data - Status Screen (Bridge Mode)
System
Device Name
The current name of the Router. This name is also the "hostname"
for users with an "@Home" type connection.
Firmware Version
The version of the current firmware installed.
Modem
Modem Status
This indicates the status of the ADSL modem component.
DownStream
Connection Speed
Displays the speed for the DownStream Connection.
UpStream Connection
Speed
If connected, displays the speed for the Up Stream (upload)
ADSL Connection.
VPI
This displays the current VPI setting used for the ADSL connec-
tion.
VCI
This displays the current VCI setting used for the ADSL connec-
tion.
LAN
IP Address
The IP Address of the Broadband ADSL Router.
Network Mask
The Network Mask (Subnet Mask) for the IP Address above.
MAC Address
This shows the MAC Address for the Broadband ADSL Router,
as seen on the LAN interface.
Broadband ADSL Router User Guide
80
Buttons
Attached Devices
Clicking this will generate a list of all devices currently using the
Access Point.
Refresh Screen
Update the data displayed on screen.