Tripp Lite B020-U08-19KTAA Switch User Manual


  Open as PDF
of 22
 
Toupgradeyourfirmware:
1. RunthedownloadedFirmwareUpgradeUtilitybydouble-clickingthe
fileiconorbyopeningacommandlineandenteringthefullpathtoit.
TheFirmwareUpgradeUtilityWelcome screen appears.
2. ReadandAgree totheLicenseAgreement(clicktheI Agree radio
button).
3. Click [Next]tocontinue.TheFirmwareUpgradeUtilitymainscreen
appears:
Theutilityinspectsyourinstallation.Allthedevicescapableofbeing
upgradedbythepackagearelistedintheDevice List panel.
4. Asyouselectdevices,adetaileddescriptionofeachappearsinthe
Device Description panel.
5. Afteryouhavemadeyourselection(s),click[Next] to perform the
upgrade.IfyouenabledCheck Firmware Version,theutilitycompares
thedevice’sfirmwarelevelswiththatoftheupgradefiles.Ifitfinds
thatthedevice’sversionishigherthantheupgradeversion,itbrings
upadialogboxinformingyouofthesituationandgivesyouthe
option to Continue or Cancel.
IftheCheck Firmware Versionisnotenabled,theutilityinstallsthe
upgradefileswithoutcheckingwhethertheyareahigherlevel
version.
Astheupgradeproceeds,statusmessagesappearintheStatus
Messagespanel,andtheprogresstowardcompletionisshownonthe
Progress bar.
8. Firmware Upgrade Utility
8.2 Starting the Upgrade
8.3 Upgrade Succeeded
Aftertheupgradehascompleted,ascreenappearstoinformyouthatthe
procedurewassuccessful:
Click Finish toclosetheFirmwareUpgradeUtility.
Iftheupgradefailedtocompletesuccessfully,adialogboxappearsasking
ifyouwanttoretry.ClickYes toretry.IfyouclickNo,theUpgrade Failed
screenappears:
Click Cancel toclosetheFirmwareUpgradeUtility.Seethenextsection,
Firmware Upgrade Recovery,forhowtoproceed.
8.4 Upgrade Failed
19
201011080 • 932900-EN.indd 19 11/29/2010 4:30:17 PM
 previous next