Filter
Top Products
23
Memory Installation Procedure
Follow these instructions to install memory modules into the Tempest i5000VS
S5372-LC.
1. Press the locking levers in the direction shown in the following illustration.
2. Align the memory module with the socket. The memory module is keyed
to fit only one way in the socket.
3. Seat the module firmly into the socket by gently pressing down until it sits
flush with the socket. The locking levers pop up into place.
NOTE: The S5372-LC only supports DDR2 Fully Buffered DIMM. Registered
Memory Module is NOT supported.
Key slot