Filter
Top Products
49
3.3.5 Console Redirection
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Console Redirection
Item Specific Help
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection:
Continue C. R. after POST:
[Disabled]
[19.2K]
[VT 100]
[None]
[Direct]
[Off]
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select
X Sub-Menu F10 Save and Exit
Com Port Address
If enabled it will use a port on the motherboard.
Disabled / On-board COM A
Baud Rate
This feature is used to enable the specified baud rate.
19.2K / 300 / 1200 / 2400 / 9600 / 38.4K / 57.6K / 115.2K
Console Type
This feature is used to enable the specified console type.
VT100 / VT100.8bit / PC-ANSI, 7bit / PC ANSI / VT100+ / VT-UTF8 /
ASCII
Flow Control
This feature is used to enable the flow control.
None / XON/XOFF / CTS/RTS
Console Connection
This feature is used to indicate whether the console is connected directly to the
system or a modem is used to connect.
Direct / Via modem
Continue C.R. after POST
This feature is used to enable console redirection after OS has loaded.
Off / On