Filter
Top Products
46
C1 Enhanced Mode (Available depending on CPU)
This feature is used to enable the C1 Enhanced mode.
Enabled / Disabled
Execute Disable Bit
This feature is used to set the Execute Bit function.
Enabled / Disabled
Set Max Ext CPUID=3
This feature is used to set Max CPUID extended function value to 3.
Disabled / Enabled
Discrete MTRR Allocation
This feature is used to configure the MTRR method. Disabling the feature will
set the MTRR method in continuous status.
Disabled / Enabled
Processor Power Management
This feature is used to select the processor power management desired.
Disable: C states and GV1/GV3 are disable
GV1/GV3 only: C states are disable
Disabled / GV1/GV3 only
VRH Overheat Protection
This feature is used to enable/disable the VRM Overheat Protection.
Enabled / Disabled
3.3.3 I/O Device Configuration
This setting allows you to configure I/O devices.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
I/O Device Configuration
Item Specific Help
Serial port A:
[Auto]
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select
X Sub-Menu F10 Previous Values