Filter
Top Products
51
3.5 Power
These settings allow you to configure the power options for your system.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Resume On Time:
Resume Time:
Power On By PCI/PCI-X
Chassis Intrusion Detect:
After Power Failure:
[Off]
[xx:xx:xx]
[Disabled]
[No]
[Stay Off]
Enabled wakes the
system up at a specific
time.
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select
X Sub-Menu F10 Save and Exit
Resume On Time
When enabled, this allows the system to be worked up at a specified time. This
time is specified by the Resume Time parameter.
Off / On
Resume Time
This option allows the user to specify the time when the system is to wake up.
Power On By PCI/PCI-X
This option allows you to power on the system by PCI or PCI-X card. When
enabled, an input signal from PME on the PCI card awakens the system from a
S5 state.
Disabled / Enabled
Chassis Intrusion Detect
This feature is used to enable/disable the function: when chassis open event is
detected, BIOS will record the event.
No / Yes
After Power Failure
Specifies the mode of operation after the system recovers from a power loss.
Stay off / Last State / Power on