Filter
Top Products
Series 600 POS Keyboard 19
Table 2. Local Mode Programming Instructions
* = Default Settings
Function Code(s)
Operation Normal Indication Remarks
20 or 30
Comm (RS232)
Main Port 0 (20)
AUX Port 1 (30)
Baud Rate
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 20 (Port 0) or 30 (Port 1).
LED (2) turns on.
2. At Series 600 Keyboard numeric keypad, enter the applicable number (1 through 9) to
select baud rate per list below.
1 = 300 6 = 9600*
2 = 600 7 = 19200
3 = 1200 8 = 38400
4 = 2400 9 = 57600
5 = 4800
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
600 Keyboard numeric keypad or by swiping the Program Card.
21 or 31
Main Port 0 (21)
AUX Port 1 (31)
Stop Bits
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 21 (Port 0) or 31 (Port 1).
LED (2) turns on.
2. At Series 600 Keyboard numeric keypad, enter the number of stop bits (1 or 2)per list
below.
1 = one stop bit
2 = two stop bits*
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
600 Keyboard numeric keypad or by swiping the Program Card.