Ultimate Technology 600 POS Mouse User Manual


 
Series 600 POS Keyboard 37
EXAMPLE 1.
This example sequence programs a “shift” key.
1. Place the Series 600 Keyboard in local programming mode by swiping Program Card.
2. At the Series 600 Keyboard numeric keypad, enter 00 or 01.
3. At the Series 600 Keyboard, press the key to be programmed.
4. At the auxiliary keyboard, press and hold the "Shift" key.
5. At the Series 600 Keyboard numeric keypad, enter 1.
6. At the auxiliary keyboard, release the "Shift" key.
7. At the Series 600 Keyboard, press ENTER to complete programming of the key.
8. Repeat steps 3 through 7 to program another key.
9. To exit the programming mode, enter 00 99 at the Series 600 Keyboard numeric keypad.
EXAMPLE 2.
This example programs the Series 600 Keyboard to start repeat mode of key using the "A" key.
1. Place the Series 600 Keyboard in local programming mode by swiping the Program Card.
2. At the Series 600 Keyboard numeric keypad, enter 00 or 01.
3. At the Series 600 Keyboard, press the "A" key.
4. At the auxiliary keyboard, press and hold the “A” key.
5. At the Series 600 Keyboard numeric keypad, enter 2.
6. At the auxiliary keyboard, release the “A” key.
7. At the Series 600 Keyboard, press ENTER to complete programming of the key.
8. Repeat steps 3 through 7 to program another key.
9. To exit the programming mode, enter 00 99 at the Series 600 Keyboard numeric keypad.