Filter
Top Products
Series 600 POS Keyboard 33
Table 3. Local Mode programming Function Codes and Default Settings
FUNCTION
CODE
PARAMETER DEFAULT
SETTING
(XXh = Hex
Code in
ASCII)
REMARKS
44 Keyswitch Polling User defined Allows the user to poll for keyswitch 1,2, or
3 MAKE/BREAK codes. Two options are
available: 0 = unsolicited mode in which
codes are sent whenever the keyswitch is
rotated, or 1 = solicited mode in which
codes are sent only when a B7 command is
executed.
45 Drawer 1 Open D1+
(44h,31h,2Bh)
Used to program a macro for cash drawer
open.
46 Drawer 1 Closed D1-
(44h,31h,2Dh)
Used to program a macro for cash drawer
closed.
47 Drawer 2 Open D2+
(44h,32h,2Bh)
Used to program a macro for cash drawer
open.
48 Drawer 2 Closed D2-
(44h,32h,2Dh)
Used to program a macro for cash drawer
closed.
49 Poll/Unsolicited Cash Drawer Status Unsolicited Allows the user to poll for cash drawer status,
instead of sending it each time it changes state,
open or closed. Two options are available: Send
on change or transition, or send only with poll
command CDCONT.
50 Disable Keys While Cash Drawer
Open
Key’s enabled Allows the user to disable key output while one
or more cash drawers are open.
70 Indicator Lights Mode Command mode
of operation
Used to select if the CAPS (2) and NUM (3) LOCK
indicators function in the same manner as a PC.
Two options are available: PC mode or Command
mode (Lights Command). Note that in the PC
mode control of the indicators will be transferred to
other higher priority commands if applied.
71 Enable/Disable Key Clicks On Enables or disables audible key clicks.
0 = off; 1 = on
80 Define Left Shift Key Key 44
See illustration
in Appendix D
If auxiliary keyboard connected to the Series 600
Keyboard is other than a standard 101 or 102-key
keyboard, used to define where the AUX keyboard
SHIFT keys are located. Refer to Appendix D.
81 Define Right Shift Key
Key 57 See
illustration in
Appendix D
Same as Function Code 80 above.