Ultimate Technology 600 POS Mouse User Manual


 
Series 600 POS Keyboard 38
EXAMPLE 3
This example programs a Sec Op Key on the Series 600 Keyboard.
1. Place the Series 600 Keyboard in local programming mode by swiping Program Card.
2. At the Series 600 Keyboard numeric keypad, enter 00.
3. At the Series 600 Keyboard, press the key to be programmed.
4. At the Series 600 Keyboard numeric keypad, enter 6 (Sec Op) or 7 (Sec Op Lock).
5. At the Series 600 Keyboard, press ENTER to complete programming of the key.
6. Repeat steps 3 through 5 to program another key.
7. To exit the programming mode, enter 00 99 at the Series 600 Keyboard numeric keypad.
EXAMPLE 4.
This example erases the macro from the primary and/or secondary key position on the Series 600
Keyboard.
1. Place the Series 600 Keyboard in local programming mode by swiping Program Card.
2. At the Series 600 Keyboard numeric keypad, enter 00 (for primary keys) or 01 (for
secondary keys).
3. At the Series 600 Keyboard, press the key to be erased.
4. At the Series 600 Keyboard numeric keypad, enter 9.
5. At the Series 600, press the “Enter” key to complete erasure of macro.
6. Repeat steps 3 and 4 to erase another key.
7. To exit the programming mode, enter 00 99 at the Series 600 Keyboard numeric keypad.