Filter
Top Products
Series 600 POS Keyboard 51
Table 5. Remote Programming Mode Commands
OP CODE
(HEX)
MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT
BA BEEPRD
Selects magnetic card read annunciation
mode.
COMMAND: BAp<CR>
BA = Op Code
p = annunciation mode select
<CR> = terminate command (0D hex)
Annunciation selection:
A = beep on good read
B = beep on bad read
C = beep on good and bad read
D = no beep
Annunciation beep frequency for good read is 2000 Hz
and for a bad read is 500 Hz.
ACKNOWLEDGEMENT: NONE
BB CDCONT
Determines when cash drawer status is
sent; on demand or when a change
occurs.
COMMAND: BBp<CR>
BB = Op Code
p = selection control
<CR> = terminate command (0D hex)
Selection Control:
A = send on change or transition
B = send on poll command "BC"
ACKNOWLEDGEMENT: NONE