Filter
Top Products
43
Basic Operation
• ID Scan – the scanner only stops on talk group ID’s
that you have programmed into the system
• ID Search – the scanner stops on any unlocked talk
group that becomes active.
To toggle between ID Scan and ID Search, press Scan
while the scanner is scanning the system.
Temporarily Holding On a System
To temporarily hold on a system, press and hold .
To hold on a different system, continue to hold and
rotate the scroll control to select the system. Normal
scanning resumes 2 seconds after you release .
Holding On a Channel
To hold on a channel, press Hold while the channel is
active. To select a different channel, rotate the scroll con-
trol. If you scroll past the beginning or end of the current
system, the scanner selects channels in the previous or
next system. To resume scanning, press Scan.
Quickly Storing an ID During
ID Search
To quickly store an active talk group ID during ID search,
press E. You see:
Quick TGID Save?
4128
To save the ID into a channel, press E. Otherwise, press
No. If you press E, the scanner stores the ID into a
channel group called Qck Save Grp in the current system,
then resumes normal scanning.
Func
Func
Func