99
Troubleshooting
The system you
are trying to
scan might be
LTR or EDACS.
Set the
scanner to
scan LTR or
EDACS
systems.
Review “LTR
Trunking” on
Page 25 and
“EDACS
Trunking” on
Page 24.
Scanner
won’t stop
scanning a
trunked
system.
No ID’s have
been
programmed.
Program one
or more ID’s or
use the ID
Search mode.
The ID’s you
have stored are
not active.
Wait for the
ID’s to become
active or scan
another
system.
Scanner
won’t acquire
the data
channel.
The squelch
might need to
be adjusted.
Adjust the
squelch
threshold. See
“Turning On
the Scanner
and Setting the
Squelch” on
Page 40.
The frequency
used for the
data channel
might be
missing.
Check your
frequency list
for the data
channel.
Missing
replies to
conversations
.
The scanner
might need to
be changed to a
Type 1 scanner
setup.
Change to a
Type 1
scanner setup.