Filter
Top Products
73
Programming/Editing Optional Settings
Off - the channel will not be treated with priority.
Note: The default setting is Off.
Setting Channel Alert
Program SysteMS E
Select the system E
Edit Group E
Select the group E
Edit Channel
E
Select the channel E
Set Alert
E
This setting controls whether the scanner will alert you
when the channel becomes active. Select your setting,
then press E.
On - the scanner beeps when the channel becomes
active.
Off - no alert sounds.
Note: The default setting is Off.
Setting CTCSS/DCS
(Conventional Channels Only)
Program SysteMS E
Select the system E
Edit Group E
Select the group E
Edit Channel
E
Select the channel E
Set CTCSS/DCS
E
This setting controls a subaudible CTCSS or DCS is used
for the channel. Select your setting, then press E.
Off - any signal opens squelch.
Search - the scanner searches for and displays any
CTCSS or DCS tone that accompanies the transmission.
Menu
Menu