Filter
Top Products
85
Using the Close Call Feature
appear for about 3 seconds. Press E when this
appears to jump to and hold on the frequency.
If this option is turned on, the scanner overrides
the current channel and goes to the Close Call hit.
The scanner displays CC Found! Press Any Key.
When you press a key, the frequency is displayed.
Turn scroll to display an option, then press E.
• Set CC Mode: Lets you select the Close Call mode.
If you turn this option on, the scanner sets itself to
its Close Call settings about once every 2 seconds.
Turn scroll to display an option, then press E.
You can also toggle this setting by pressing
then
• CC AutoStore: Lets you select whether the scan-
ner automatically stores Close Call hits into chan-
nels. If you turn this option on, the scanner starts
Close Call mode and stores any Close Call hits, up
to the maximum you specified in the Max Auto
Store setting. If the scanner stores more hits this
setting, it stops Autostore operation.
Turn scroll to display an option, then press E.
Close Call Hits
When the scanner detects a Close Call hit, it alerts you
according to the Override and Alert settings in the previ-
ous section. While listening to a Close Call hit, you can
press Hold to hold on the hit frequency, press E to quickly
save the frequency into memory, press L/O to lockout the
frequency from Close Call and Search operation, or wait
for the transmission to end.
If you are in Close Call Only or Close Call Override mode,
and you do not press any key, the scanner returns to its
previous operation after the transmission ends and the
set delay time expires.
If you are holding on the frequency, press Hold again to
resume the previous operation.
Func