Uniden BC246T Scanner User Manual


 
53
Programming Radio Systems
See “Setting Control-Channel Only (Motorola Sys-
tems Only)” on Page 68
See “Setting System Lockout” on Page 62
See “Reviewing Locked Out Frequencies” on
Page 86
See “Setting System Attenuation (Trunked Systems
Only)” on Page 68
See “Deleting Systems” on Page 69
See “Copying/Pasting Systems” on Page 69
See “Setting System Frequencies” on Page 53
See “Entering/Editing Motorola Channel Groups”
on Page 53
Setting System Frequencies
SET FREQUENCIES E
New FREQUENCY E
Input a system frequency, then press E.
To enter additional frequencies, press , use the scroll
control to select New Frequency, then repeat the above.
Note: If you select Control Channel Only mode (see “Set-
ting Control-Channel Only (Motorola Systems Only)” on
Page 68), you only need to enter the frequency(s) that
can be assigned as the control channel (this is usually
notated on the available frequency lists). Otherwise, you
must enter all of the frequencies.
Entering/Editing
Motorola Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
Menu