Filter
Top Products
44
Basic Operation
Quick-Storing Channels
1. Hold on an existing channel in any system.
2. Enter the frequency or talk group ID you want to store
(press to enter hyphens in talk group ID’s).
If you enter a frequency, the scanner stores it in the
Qck Save Grp group in a system called Qck Save Cnv
Sys. These are created if they do not exist. Then, the
scanner prompts you to save other channel settings.
If you enter a talk group ID, the scanner prompts you
to rotate the scroll control to select the system where
you want to store the ID. The ID is stored into a chan-
nel group named Qck Save Grp in the selected sys-
tem. Only systems that match the ID type are shown.
Quickly Recalling Channels
1. Press Hold to hold on any channel.
2. Press + Rcl. The scanner prompts you to select
the system where the channel is stored.
3. Rotate the scroll control to select the system, then
press E. The scanner prompts you to select the
channel group where the channel is stored.
4. Rotate scroll to select the group, then press E. The
scanner prompts you to select a channel.
5. Rotate the scroll control to select the channel, then
press E to hold on that channel.
Monitoring Trunking Activity
(Motorola Only)
Press HOLD when no talk group is active. Or, press
HOLD, then scroll to the control channel. Talk Group ID’s
appear as they become active on the system.
Func