Filter
Top Products
82
Searching
Notes:
• If all frequencies in the search band you selected
are locked out, All Locked! appears and the scan-
ner does not search the band.
• If the service you select uses channels (such as CB
radio or marine), the scanner displays the service
channel number.
Quick Search
Quick Search lets you search from the currently-tuned
frequency if you are scanning a conventional system or
sets the system to ID search if you are scanning a
trunked system.
If you are on a conventional system or channel, press
and Scan/Srch to start quick search. QUICK Search?
appears. Press E to start quick search or No to go to the
search menu.
CTCSS/DCS Search
CTCSS/DCS Search lets you search for CTCSS or DCS
tones when it finds an active frequency in search and
Close Call modes. You can identify up to 50 CTCSS
tones and 104 DCS codes.
Turning this option on lets the scanner search for CTCSS/
DCS tones. If the scanner detects the tone, it displays the
tone’s frequency.
1. Press then turn the scroll control until
SRCH/CLO
CALL OPT
appears. Then press E. One of the search
feature options appear.
2. Turn the scroll control until
CTCSS/DCS SEARCH
appears, then press E to select it.
3. Turn the scroll control until
ON
appears to turn on
CTCSS/DCS search or until
OFF
appears to turn it off,
then press E.
Func
Menu