Filter
Top Products
106
Set Attenuator
to select to choose an attenuation for all frequencies in the range. F
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.
Set Record
to enable a live audio output from REC to an audio recording device. F
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the three Search keys
for quick access to your favorite searches.
[MENU] Search for ... F
Set Search Key F
Select the key to assign F
Select a search range F
Now, to access that search, hold on any channel, then press F and the number
key [4] to [6] corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Railroad
Saving a Found Channel (Quick Save)
Press [EYES] to save a channel’s frequency if you hold on a channel or detect a
channel, instead of using Direct Entry at another time. The alpha data is also
stored. If a GPS unit is attached, the longitude and latitude data is saved and also
becomes the name of the channel. For example, if the position is 32°57’33.60 N
latitude and 97°05’34.18 W longitude, the name saved is 3257.33-09705.34.