Filter
Top Products
43
Controls, Keys, and Functions
• Press to cancel FUNCTION mode and return to NORMAL mode.
Function Plus
Several specific actions can be accomplished by pressing F then pressing
another key or pressing
F then pressing and holding another key.
F + [MENU]
• Use this combination, in Scan or Scan Hold mode, to switch to the edit menu
for the current system, current search range, or current location data.
• Use this combination to switch to the BearTracker menu, if in the BearTracker
System.
• Use this combination in any other mode to go to the menu for that mode.
F + [L/O]
• Use this combination, to temporarily lockout a current system, current site, or
current search range in Scan or Scan Hold mode. The temporary lockout is
cleared when you turn power off then on.
• Use this combination then press [L/O] twice rapidly to permanently lockout a
system or search range. The permanent lockout remains in effect until you
purposely unlock that system or search range.
• Use this combination to switch to Review Search Lockout from Search, Search
Hold, Close Call Only, and Close Call Hold modes.
• Use this combination except press and hold [L/O] to unlock all systems, sites,
search ranges and Close Call Hits systems and enable all the System Quick
Keys for Scan and Scan Hold modes. The same operation unlocks all
Locations of all types in the Review Location mode for GPS related settings.
F + [1] to [9] and [0] Keys
• Use this combination, in Scan mode, to turn on or off any assigned Group
Quick Key (GQK).
• Use this combination in Scan Hold mode and press [1] to toggle Priority mode
— Off, On, Plus On.
• Use this combination, while in WX Scan or WX Scan Hold, press [2] to toggle
between WX Scan and WX Alert Scan.
• Use this combination, while in any other mode but Scan and GPS. Press [2] to
toggle WX Alert priority on or off. Press and hold [2] to switch to WX Scan
mode.