Filter
Top Products
93
Programming Your Scanner
2. Rotate the Scroll Control to select a new first letter. Press [6] to move one
character to the right. Repeat the Scroll Control action to change the
character. To move one character to the left, press [4].
3. Repeat Step 2 until you have entered the system name. Then press F to
accept the setting.
Notes:
• Each group name can be up to 16 characters. Abbreviate as necessary to fit.
• The group and system (for conventional, SCAT, and LTR systems) or site (for
Motorola and EDACS systems) name alternate in the top line of the display
when the scanner stops on a channel.
•Press [.No] twice to delete the current character.
•Press [.No] three times to clear the entire alpha tag.
To assign a Quick Key to a Group, follow these steps.
[MENU] Program System F
Select a system F
Edit Group F
Select the Group F
Set Quick Key F
Select a desired quick key for this Group.
Once you create a channel group, store channels in that group. See “Programming
Channels” for specific channel options.
[MENU] Program System F
Select an existing system F
Edit Group F
Select an existing group F
Set Lockout F
This setting determines whether the scanner will scan this group of channels.
Select your setting, then press
F.
Lockout — the group is not scanned.
Setting the Group Quick Key MECL
Editing Channels MECL
Locking Out Channel Groups MECL