Filter
Top Products
15
Introduction
Tone Volume Adjust — lets you select and set various tones for different
purposes. You can adjust the level of the following tones: Key Beep, BearTracker
Alert, Emergency Alert, Channel Alert, Close Call Alert, Tone-Out Detection Alert,
and Location Alert.
PC Control — lets you can connect the scanner to the serial port of your PC and
control the scanner with special software.
Wired Clone — makes it easy to transfer data from one scanner to the other such
as memory information and menu settings.
Memory Backup — feel confident of secure settings because the scanner’s
memory is backed up during operation and retained when power is turned off.
Audio AGC — helps to balance the audio level from different sources.
Record Out — you can connect an output jack to a VOX controlled recorder or PC
sound input to record the received audio.
Orange Wire Vehicle Connection — a special wire lets you connect to the
dimmer circuit of your vehicle so the vehicle’s dimmer also dims the scanner’s
lighting.
Startup Configuration — lets you easily change the scanner’s operation for
different areas.
Trunk Tracking
Trunk Tracker III — you can scan the following trunked systems: Motorola Type I
800 MHz, Motorola Type II 800, 900 MHz, UHF, VHF, EDACS WIDE, NARROW,
and SCAT, plus LTR
Control Channel Only — eliminates the need to program voice channel
frequencies for Motorola systems.
Multi-Site Trunking Support — lets you program the scanner to share trunked
system channels across multiple sites, and turn on and off each site independently
so that you can select the best site to scan for your area without duplicating
channels.
ID Auto Store — you can store a new TGID found during a search into a specified
system.
Quick Search — lets you continue a search starting from a current frequency in a
conventional system or from a current trunked channel TGID in a trunked system.