Filter
Top Products
84
[MENU] Program System F
Select an EDACS Wide/Narrow system F
Edit Sys Option F
EDCS ID Format F
EDACS Talk Group ID’s are commonly provided in one of two formats: AFS and
Decimal. This setting determines how you enter EDACS ID’s and how the scanner
displays them.
AFS Format — the scanner uses AFS format for Talk Group ID’s
Decimal Format — the scanner uses decimal format for Talk Group ID’s
Note: The scanner defaults to AFS (agency, fleet, subfleet) format - the format
used in most EDACS systems.
[MENU] Program System F
Select a system F
Edit Sys Option F
Set Record F
This setting controls how the scanner handles the record option for channels in the
system.
All Channel — The scanner sends the audio for all channels in the system to
the REC jack, regardless of the channel’s record option setting.
Marked Channel — The scanner only sends the audio for channels that have
the Record option turned on to the REC jack.
Off — The scanner does not send any audio from any channel in the system to
the REC jack, even if the record option is turned on for a channel.
Note for systems: In order for the function to work, you must set the channel to
record. You must also set the system’s record option to either All Channel
(which will record all channels regardless of the channel’s record setting) or
Marked Channel (which only records the channels you’ve set to record).
[MENU] Program System F
Select a trunked system F
Setting the EDACS ID Format E
Setting the System Record Option MELCS
Reviewing ID Search Lockouts MEL