Filter
Top Products
130
Setting the Options
[MENU] Program Location F
Select a location type (POI, Dangerous Xing, or Dangerous Road). F
New Location F
The scanner assigns a sequentially created number to the location.
Edit Name F
Use the Scroll Control and F to give the New Location a name. You could, for
example, enter the name of the place or the Route Number.
Set Type F At this level you have an opportunity to reassign or edit the
location type you first selected and set the location to either one of the other types
or change the data in an existing location.
Set LocationInfo F Input the latitude and then the longitude.
Set Lockout F The options are:
Unlocked — the location is unlocked and active
Temporary L/O — you can move away more than four miles and then come
back again. At that time, L/O status is automatically canceled.
Lockout — the location is disabled unless you power the scanner off then on.
Deleting a Location
If you have programmed a location that you no longer want, you can delete it as
follows.
[MENU] Program Location F
Select a location such as Dangerous Xing F
Location to be deleted F
Delete Location F
Confirm Delete? Yes=”E” / No=”.” F
Make your choice to either delete the location or to cancel.