Filter
Top Products
138
If you still cannot get satisfactory results while using your scanner or if you want
additional information, please call or write the Uniden Parts and Service Division.
The address and phone number are listed in the Warranty at the end of this
manual. If you would like immediate assistance, please call Customer Service at
(800) 297-1023.
If you have Internet access, you can visit http://www.uniden.com or in your
browser, type scanners.uniden.com for additional information.
Scanner won’t acquire
the data channel.
The squelch might need to be
adjusted.
Adjust the squelch threshold. See “Turning
On the Scanner and Setting the Squelch”
on Page 51.
The frequency used for the data
channel might be missing.
Check your frequency list for the data
channel.
Missing replies to
conversations.
The scanner might need to be
changed to a Type I scanner
setup.
Change to a Type I scanner setup. See
programming information on our website
scanners.uniden.com
The fleet map might be
incorrect.
Try another preset fleet map or program
your own fleet map.
One or more of the system’s
frequencies might not be
entered.
Make sure all the system’s frequencies
have been entered.
The system you are trying to
scan might be LTR or EDACS.
Set the scanner to scan LTR or EDACS
systems. See programming information on
our website scanners.uniden.com
Problem Possible Cause Suggestion