Filter
Top Products
16
Name Editing — you can edit or change names, using up to 16 characters, for the
following attributes:
System, Site, Group, Channel, TGID, GPS Location, Custom Search Range,
SAME Group (weather), and Tone-Out.
Trunking Activity Indicators — show you trunking activity when you hold on a
control channel.
Searches and Scanning
Attenuator — lets you reduce by 20 dB the strength of a strong signal to help
eliminate weak reception or interfering transmission.
Alert Mute — you can disable alerts based on a BearTracker priority channel,
Emergency Alert, Close Call, Tone-Out, and GPS.
Alert Plus Scan — lets you listen to only alerts from BearTracker systems or
groups, Close Call, Weather (WX), and GPS.
Channel Alert — lets you assign a tone to a channel so that when the channel
becomes active, the tone sounds.
Channel Memory Scan — you can scan conventional and trunked system
channels at the same time with programming.
CTCSS/DCS Search — quickly determines the CTCSS/DCS sub-audible tones
used by an agency.
Convenient Lockout — lets you lockout any system, site, group, or channel so
that item is skipped during scanning. If a system, site, or group is locked, the
channels of that entity will be skipped.
Custom Search — lets you program up to 10 search ranges and scan each in
order.
Dropout Delay — lets you set a time value so that you don’t miss a reply at the
end of a transmission. The value can be set for systems (all channels share the
same value), as well as Search, Close Call, and Tone-Out settings.
Priority Plus — this option lets you scan and hear only priority channels.
Priority Scan — lets you designate conventional channels as priority so during
scanning, they are checked every 2 seconds.
Repeater Reverse — using one key, you can choose to listen to the input
frequency of a conventional or trunked system.