Uniden UBC3300XLT Scanner User Manual


 
• ID Search mode/ID Search Hold mode
Menu Description and Numeric Keypad
Equivalents
Below are the Menu screens and a brief description or
purpose of the feature.
1:SERVICE OPTION
1:AIR
The Air Service Search feature allows you to scroll
through the preprogrammed services.
2:CHAIN SEARCH
You can program up to 10 search ranges. The first
time you program a range you will need to do so
through the Menu. After the first time you can
program a range as you do on most any other
scanner, using the numeric keypad or VFO control.
Use this Menu item to select the search range that
you want to program. You can program range 1
through 10, one at a time. For each of the ranges,
the following options can be modified.
1:CHAIN SEARCH
You must turn Chain Search feature ON, in
order to use the Chain Search feature.
2:SEARCH RANGE
1:RANGE
Enter the upper and lower frequency
limits of the Search Range.
2:STEPS
You can assign a variety of step sizes
to the search range.
Note: The default step is usually
acceptable and is listed on
page 1.
3:MODE
You can change the Auto receive
mode to AM, FM, WFM, NFM.
17
1:SERVICE OPTION
2:SCAN OPTION
3:SYSTEM OPTION
MENU MODE
UBC3300XLT OM 5/14/04 3:29 PM Page 17