Filter
Top Products
4:ALPHA TAG
You can enter an Alpha Tag for any
or all of the search ranges.
5:TRUNK
During Chain Search mode, when the
scanner finds an active frequency.
The trunk tracking system will be
active. Four frequency plans apply to
the Control Channel Only feature (for
details see page 69).
3:DELAY
Set the delay for the search ranges to 1:ON
or 2:OFF. This applies to Search mode
(See 2:SCAN OPTION /
1:CONVENTIONAL / 2:DELAY
for details).
4:ATTENUATOR
Set attenuation for all search ranges.
(See 2:SCAN
OPTION/1:CONVENTIONAL /
5:ATTENUATOR for details).
5:TONE DATA
The default mode is 2:OFF. This means that
you will receive all transmissions on any
frequencies that are active within your search
range(s). By selecting CTCSS or DCS you
can set the radio to receive only a particular
subaudible tone to be received during your
search. You can also lockout a particular
CTCSS or DCS tone. You may wish to do this
if you want to search a range but not hear
transmissions on any frequency that has a
particular subaudible tone.
Note: Through the System Menu you can set
the radio to operate in Tone Search
mode during Search as well. In this
mode, the radio will automatically
determine the active subaudible tone
on any frequency received during the
search.
6:AUTO STORE
You can automatically store active
frequencies found during a search into the
memory. You can select which bank you want
to program the found frequencies. The audio
will be muted during Auto Store.
18
UBC3300XLT OM 5/14/04 3:29 PM Page 18