Filter
Top Products
To enter a LTR ID:
For a LTR ID, the Area Code, Home Repeat number and ID
make up the talk group ID. Please see page 64 for more
information.
1. Enter the Area Code and then press
(decimal key)
2. Enter the Home Repeater number and
then press (decimal key).
3. Enter the ID you want to store.
4. Press E.
Note: To clear a stored ID while entering an ID, press 0 and
E successively, and start over.
Assigning a Text Tag to a Talk Group ID
1. Press MENU/BACK.
2. Select 2:SCAN OPTION /
2:TRUNK by rotating the VFO and
pressing E.
3. Select the bank number by rotating the VFO and pressing
E. You can also enter the Bank number by using the
keypad bank.
4. Select 3:TALK GROUP and ID location number by
rotating the VFO and pressing E.
5. Select 2:ALPHA TAG by rotating the VFO and
pressing E.
6. The cursor appears on the display. Rotate the VFO to
change letters, and press HOLD/MAN or RSM to move
right or left. Both capital and lower case letters are
available, as well as numbers and punctuation marks.
7. After entering the desired text, press E.
☞ Remember! To clear a mistake while entering the letters,
press HOLD/MAN, RSM or (decimal key) repeatedly
until the display is cleared.
.
.
.
49
L5-0
------
0-02-120
¡
ENTER ID
M5-0
1216
-------
ENTER ALPHA TAG
UBC3300XLT OM 5/14/04 3:29 PM Page 49