Filter
Top Products
39
2. Press TRNSFR to store the
frequency in the channel you
selected. The smallest empty
channel number flashes on the
display. If necessary, you can also
change the channel by scrolling the
VFO.
3. Press E.
Note: • If the frequency you want to store exists already,
WARNING appears on the display and you will hear
a beep. (See “Duplicate Frequency Alert” on page
27.)
• After storing the frequency, it moves to the Search
Hold mode.
• In case there is a not a free channel, the frequency
you want to store will automatically be stored in the
previous channel before you entered into Chain
Search mode.
4. Repeat steps 1, 2 and 3 after starting the search for all the
search frequencies you want to store.
Auto Storing
The scanner automatically stores active frequencies if Auto
Store feature is turned ON.
But the frequencies already stored can not be stored.
To make use of this feature, set a search range first (see
page 36), then enter into the Menu mode. If you start this
feature without setting a search range, NO LIMIT DATA
appears on the display.
1. Press MENU/BACK.
2. Select 1:SERVICE OPTION / 2:CHAIN SEARCH
/ 6:AUTO STORE by rotating the VFO and pressing E.
3. Select 1:ON by rotating the VFO and
pressing E.
4. Select the bank number you want to
use with the keypad. The selected
bank number appears on the display.
Note: If the selected bank has no free
channels to store, CH DATA
FULL will appear on the display
and you will hear a beep.
AUTO STORE
SELECT BANK
12--56----
AUTO STORE
ERROR
CH DATA FULL
SRCH 12.5k
1240.0000 FM
Range 1
C004 0000.0000
UBC3300XLT OM 5/14/04 3:29 PM Page 39