Filter
Top Products
• If you enter a frequency which is
out of the system’s trunking
range, a beep sounds and
ERROR appears on the display.
• If you enter a frequency which has been stored in
another channel, you will hear a beep and the
channel stored displays WARNING (Refer to
“Duplicate Frequency Alert” on page 27).
STEP 2 is complete.
STEP 3:
Programming ID Scan Lists Manually
Scan Lists
Each bank of your UBC3300XLT can be a trunk tracking bank
and it can be a conventional scanning bank. When you
designate a bank as a trunking bank, your scanner sets up 10
Scan Lists, which are simply lists used to store your favorite
Talk Group IDs. Each list can contain up to 10 IDs, so you
can store a total of 100 IDs for each trunk tracking bank.
(1000 if you use all the banks as trunking banks!)
Scan Lists help you organize the trunking system users into
categories. For example, you might use List#1 for police IDs,
List#2 for fire department IDs, List#3 for emergency medical
service IDs, etc. Once IDs are stored in lists, you can scan
them like you scan conventional frequencies and you can
lockout any one (up to 9) of the 10 scan lists by pressing the
corresponding numeric key. When an ID is active, the scan list
number will appear on the display. You can program your
Scan Lists either manually or during Trunking Search mode.
Check the web site www.bearcat1.com/free.htm for a
complete list of talkgroups for your area that you can program
into your Scan Lists.
In order to program Talk Group ID’s, you must first complete
Step 1 – “Selecting or Changing Trunking System Type”,
page 45 and Step 2 – “Programming Trunking Frequencies”,
pages 46-47.
1. Press MENU/BACK.
2. Select 2:SCAN OPTION / 2:TRUNK by rotating the
VFO and pressing E.
3. Select the bank number by rotating the VFO and pressing
E.
47
C 010
0000.0000
ERROR
OUT OF BAND
UBC3300XLT OM 5/14/04 3:29 PM Page 47