Filter
Top Products
4. Select 3:TALK GROUP by rotating the VFO and
pressing E.
5. Select the ID location by rotating the VFO or using the
keypad and then press E. You decide which location you
want to place the Talk Group ID. (The first number
represents the Scan List number and the second number
represents the Memory Location number.) (Direct entry
method example: enter "1-5" by
pressing 1, (decimal key), 5.)
6. Select 1:ID by rotating the VFO
and pressing E.
7. Enter the ID.
Note: After you have programmed the ID in a selected
location, while still in the Menu mode, you can set your
Alpha Tag (see page 28), or turn ON the Beep Alert for
an individual talkgroup (see page 21).
To enter a Type 2 Talk Group ID:
1. Enter the ID you want to store.
2. Press E.
To enter a Type 1 ID:
For a Type I ID, the block number, Fleet
number and Subfleet number make up
the talk group ID number. Please see
page 88.
1. Enter the ID you want to store. (ID= Block number + Fleet
number + (decimal key) + Subfleet number)
2. Press E.
To enter an EDACS
®
ID:
1. Enter the ID you want to store.
Use the (decimal key) for the
"dash".
2. Press E.
Hint: Remember that Uniden's AFS format allows you to
enter full or partial EDACS IDs for powerful flexibility in
all modes. Be sure to read the section "EDACS
Reception" on page 60 to learn how this works.
Note: The UBC3300XLT default to "AFS" talkgroup displays
for EDACS
®
only.
.
.
.
48
M1-5
------
¡
ENTER ID
M5-0
------
050-2
¡
ENTER ID
E5-0
------
09-022
¡
ENTER ID
M5-0
4128
1216
¡
ENTER ID
UBC3300XLT OM 5/14/04 3:29 PM Page 48