Filter
Top Products
26
Programming
Before the UBC3300XLT can begin conventional scanning,
you must program a frequency into at least one channel.
Repeat this procedure for each channel you want to program.
Storing Frequencies into Channels in Menu
Mode
1. Select frequencies you received from your dealer, from
various sources on the internet, or from one of the guides
listed on page 11.
2. Press MENU/BACK.
3. Select 2:SCAN OPTION / 1:CONVENTIONAL by
rotating the VFO and pressing E.
4. Select a channel.
a. Enter the
channel number
using the keypad.
b. Then press E.
5. Select 1:FREQUENCY, and press E.
a. Enter the frequency number
using (decimal key) and the
keypad.
b. Then press E.
6. Enter the alpha tag and press E.
(See page 28.)
7. The following display appears, select
the location you want.
Note: • To clear a mistake while entering the frequency,
press (decimal key) repeatedly until the
display is cleared.
.
.
HOLD/
MAN
SEARCH
SCAN
AIR/STEP
CH/
FRQ
MENU/BACK
L/O
.
SELECT
REVERSE
TRUNK
RSM
E
C 001
1:FREQUENCY
2:DELAY
3:TONE DATA
C 001
855.0000 FM
ALPHA TAG
¡
1:OTHER CHANNEL
2:CHANNEL OPTION
3:DONE
C 001
0000.0000
FREQUENCY
UBC3300XLT OM 5/14/04 3:29 PM Page 26