Filter
Top Products
3:SYSTEM OPTION
1:DIMMER
Allows you to change the brightness of the display.
Also you can change the lighting length of time.
2:SCREEN MASK
Screen Mask allows you to limit what appears on the
display to the alpha tags that you have set for a
channel along with a few function icons. Screen Mask
removes the frequency, receiving mode tone data
and signal strength bars. This mode is particularly
useful in public safety vehicles where "information
overload" is already a problem. Screen Mask does
not work in Search mode.
3:KEY BEEP
Use this function to turn 2:OFF the keypad
acknowledgement beep. The default setting is 1:ON.
4:ENTER LOCK
Use Enter Lock to prevent accidental re-programming
of channels, tone (CTCSS/DCS) and talkgroups
entered into memory. The default setting is 2:OFF.
5:PC CONTROL
Use this function to set the transfer speed (baud rate)
at which your personal computer (PC) communicates
with the scanner when downloading information into
your scanner. See page 72 for details.
6:CLONE
You can clone all the programming, including
frequencies, talkgroups and alpha tags as well as
bank settings and other parameters from one
UBC3300XLT to another UBC3300XLT.
7:DATA SKIP
A scanner will normally stop on any transmission it
receives. This means the UBC3300XLT will
occasionally stop on data signals and unmodulated
transmissions.
You can automatically skip many of these types of
transmissions with data skip turned ON.
8:SQ MODE
The SQ Mode allows you to set at your option,
whether the scanner will stop on all active
transmissions on a particular frequency or it will only
respond to transmissions with a pre-set subaudible
tone. This applies to both Conventional Search and
Scan modes. The options are as follows:
24
UBC3300XLT OM 5/14/04 3:29 PM Page 24