Filter
Top Products
6.
Press [E]. The frequency is now programmed into the
current channel.
7.
You are finished, and may now skip to the next section.
Press [SND] twice. When the channel number blinks,
enter the new channel number using the numeric keys.
Press [HLD] to see if the selected channel is already
programmed.
8.
If the selected channel already has a stored
frequency:
The display alternates between the current channeV
frequency and the selected channel! frequency. Ifyou
wish to keep the selected channel's frequency, press [.]
twice to return to Step 7. Otherwise, that frequency will
be replaced by the new frequency selection when
programming is completed.
If the selected channel is open (empty):
The display alternates between the current
channellfrequency and the selected channeVopen
frequency (000.000).
Note: Be sure you have pressed [HLD] before
continuing with the next step. Otherwise IlError"
appears on the display when you try to complete the
programming entry. This is to avoid accidentally
erasing a frequency you want to keep.
9.
Press [E] to complete programming.
You are finished, and may now skip to the next section.
10. Press [SND].
"BANK" flashes on the display, and the current bank
number is shown.
11. Press the numeric key(s) for the new bank selection.
The new bank indicator appears, and its lowest open
channel starts flashing. When programming is
completed, the frequency will automatically be stored
into the channel. Note: After entering the selected bank
number ifthe screen displays a message indicating the
bank is IIFULL",inthis case select another bank.
12. Press [E] to complete programming.
The frequency is stored, and the bank channel is
displayed with its new frequency. (The old channel will
retain its original frequency.)
18
1:
--- ---
~
-
--
I,
, ---~---------.
-------
I
I
!
\
I
\
i
I
\
I
,
I
i
I
,
\
I
\
!
I
\
I
I
I
I