Filter
Top Products
Channel Lock Out
You can lock out any programmed channels (including Priority
Channels) so they will not be scanned, if desired.
Note: Locking out a programmed channel does not erase
the frequency in the channel.
This feature is active in Manual Mode or Scan Mode.
To lock out a channel:
Press [LlO] when the scanner is on a channel you do not want
to hear.
"ud' appears on the screen to indicate that the displayed
channel is now locked out.
Note: Ifyou lock out all PriorityChannels and press [PRQ,
the screen displays "Peh Loe our' for 3 seconds, and
Prioritycannot be activated. (Priority Channels are
described shortly in IISettingUpPriorityChannels.'/
To restore a locked out channel:
1. Displaythe locked out channel, using one of the
previously described methods.
2. Press[LlO].
"ud' disappears to indicate that the channel is now
unlocked and restored for scanning.
To restore all locked out channels of a selected bank at
one time:
1. Press [SCAN] to start scanning.
2. When the indicator of the selected bank starts flashing,
press [MANUAL] to stop scanning.
3. Press and hold [LlO] for more than 2.5 seconds.
You will hear 2 short beeps, indicating that all channels
are unlocked and restored for scanning.
Searching for Locked Out Channels
During scanning, you will not see locked out channels. To look
for locked out channels and display them on the screen, first
press [MANUAL] to stop scanning. Then use the Rotary
Tuner to step through the bank. "ud' will appear on the
screen to indicate the locked out channels.
26
---L
~
_._=
--
;;:
--- nr