Filter
Top Products
ENGLISH
System
This function is to select the system of signal
input to the projector. The available system
mode are listed on the pull-down menu but-
ton according to the input signal. Select a
system and then click Set button.
Control
If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" ( p.38) is available,
they are also listed together with the above mode.
Available selection at the RGB input
Item Description
XGA1........................It automatically switches to the proper computer
system of the input signal.
*The computer system modes (VGA, SVGA, XGA.
SXGA, UXGA, WXGA...) which meet the input sig-
nal are listed.
Available selection at the Video/S-v ideo/Scart input
Item Description
AUTO........................It automatically switches to the proper color sys-
tem of the input signal.
*The selectable color systems are PAL, SECAM,
NTSC, NTSC4.43, PAL-M and PAL-N.
* AUTO is fixed at the Scart input.
Available selection at the Component input
Item Description
AUTO........................It automatically switches to the proper scanning
system of the input signal.
*The selectable scanning systems are 480i, 576i,
480p, 576p, 720p, 1035i and 1080i.