Filter
Top Products
12 VISIONEER STROBE XP SCANNER USER’S GUIDE
Installing
BEFORE YOU BEGIN
Please make sure of the following before you begin installation:
■ If your computer has AntiVirus or AntiSpyware software running,
you may see messages during installation asking you to allow the
installation to proceed. Although the messages will differ based on
the software your computer is running, in each case you should
allow the installation to proceed. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your scanner.
But if you do, make sure to turn it back on again when installation
is finished.
■ If you already have a scanner connected to your computer, you need
to remove its driver programs first before beginning the installation
of your Visioneer Strobe XP scanner. Please see “How to Uninstall
Your Scanner” on page 147 for basic instructions, or see the User’s
Guide that you received with your other scanner for specific
instructions.
■ The information in this guide may cover software not provided
with the scanner you purchased. Please disregard any information
about the software not applicable to your chosen product. Visit our
web site at www.visioneer.com for the latest software updates for
your scanner.
Warning: Do not plug in the USB cable until after you have
installed the software. Complete the installation steps in the order
described in the installation procedure below.