Filter
Top Products
86 VISIONEER STROBE XP SCANNER USER’S GUIDE
CONFIGURING BEFORE SCANNING
You can manually configure the scan settings before beginning the
scanning process. In that case, you select Configure Before Scan as the
Configuration. When you start to scan, the scanning stops and one of
the scanning interfaces opens for you to set the scanning options.
To configure before scanning:
1. Open the OneTouch Properties window.
2. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The TWAIN Interface appears for you to configure the
scanning. See “Scanning from PaperPort Using the TWAIN
Interface” on page 121.
WIA—The Windows Image Acquisition Interface (WIA) appears
for you to configure the scanning. See “Scanning from the WIA
Interface” on page 136.
Right-click on Configure Before
Scan to get the menu, and choose
the interface to use for configuring.
Note: The WIA option is only available if your computer is running
Microsoft Windows XP.