Filter
Top Products
35
Index
Contents
35
Index
Contents
Interactive pen display
CUSTOMIZING PEN BUTTONS
Select the PEN tab to change the functions assigned to the side switches and tip of your pen.
Note: Some product configurations may include a pen without side switches.
Select the button function to
perform when pressing the upper
or lower side switch.
When you bring the pen tip within
5 mm (0.20 inch) of the pen display
screen surface without touching
the screen and press the upper or
lower side switch, the selected
function occurs.
Tip
: To make double-clicking
easier, set the side switch to
double-click automatically
by selecting D
OUBLE CLICK.
Double-click here to change the function assigned to the pen tip.
• At least one pen button should be set to the C
LICK function.
• The tip must be set to C
LICK in order to draw in most graphics
applications.
You can change the S
IDE SWITCH MODE to best
fit the way you like to use the pen when making
right-clicks or other click functions.
To access the S
IDE SWITCH MODE settings, click
on the O
PTIONS... button at the bottom of the
control panel. In the O
PTIONS dialog box:
•Select H
OVER CLICK to perform click
functions without touching the pen tip to
the pen display screen surface.
• When C
LICK & TAP is selected, you must
press the side switch while touching the
pen tip to the pen display screen surface in
order to perform a click function. C
LICK &
T
AP enables the precise placement of your
click functions, and is the default setting for
Tablet PCs.