Filter
Top Products
Installation and Configuration
2–14 TM-XR9B-01XN
Locating the Power Supply on Your Network
1. Record the MAC address for your power supply. This will be visible
at the back of the XFR, on the interface card subplate. For example,
MAC Address:
______________________________
2. Insert the Xantrex XFR Ethernet Software Utilities CD into your CD
drive.
3. If the CD does not start automatically, double-click the My Computer
icon, double-click the CD icon and then double-click
autorun_main.htm.
4. When the menu appears, click Xantrex Device Discovery to install
and run the application. This application will find and list all XFR’s
with an Ethernet/RS-232 Interface card on your network.
5. You can now scan the list and locate your new XFR by its MAC
address.
6. If your network uses a DHCP server and DHCP was enabled on the
XFR, your new instrument will already have an IP address. If not, you
will have to configure an IP address manually. Refer to steps 2 and 3
in “Configuring Ethernet Bridge” on page 2–15 for more information.
7. Write down the IP address so that you can access the instrument via
its web server, and for when you start communicating with the power
supply.
MAC Address
00429D 22EF45
TM-XR9B-01XN.book Page 14 Monday, April 19, 2004 9:00 AM