Filter
Top Products
Installation and Configuration
2–18 TM-XR9B-01XN
Baud Rate Selection
Serial transmission sends and receives data in bit streams at fixed bit
rates. Both the computer and the interface must have the same bit rate
setting for proper communication. The default baud rate is 9600. We
recommend that you do not change this setting. If the setting must be
changed, use Table 2-6 to select the correct jumper positions. You will
need to remove the cover to change any jumpers. See “Changing Internal
Jumpers” on page 2–8.
Table 2-6
Jumper J2 Settings for Baud Rate
9600 closed closed closed
4800 open closed closed
2400 closed open closed
1200 open open closed
600 closed closed open
300 open closed open
150 closed open open
75 open open open
TM-XR9B-01XN.book Page 18 Monday, April 19, 2004 9:00 AM