Filter
Top Products
10 Paper and other Media
158 Xerox Phaser 3635MFP User Guide
Loading the Bypass Tray
1. Lower the bypass tray, located on the front of the product and unfold the
paper support extension.
Remove any curl
on postcards and labels
before loading them into
the Bypass Tray.
2. Prepare a stack of paper for loading by flexing or fanning them back and
forth. Straighten the edges on a level surface.
3. Load the print material with the
print side facing down and
against the right edge of the
tray.
NOTE: Hold transparencies by the
edges and avoid touching the print
side.
4. Adjust the paper guide to the
width of the stack of print
material. Ensure you have not
loaded too much print media.
The stack should be under the
Max. Fill Line.
5. The UI screen shows the current paper supply settings for the Bypass
Tray on the left hand side. Press the Size button and/or the Type or
Color button to change the settings if necessary. If the settings are
correct, press the Confirm button. Please refer to Setting the Paper Size
in the Paper and other Media chapter on page 162.
Bypass Tray
Paper Guide Max Fill Line