Filter
Top Products
11 Setups
Xerox Phaser 3635MFP User Guide 169
Localization
Before using your new machine, the localization settings below will have been
set using the machine installation wizard. As your requirements change, you
may need to reset or adjust these settings.
Set Date and Time
Some features and functions on the machine require the local date and time
such as the header on a fax and the configuration sheet. This utility enables
you to set and change the local date and time on the machine.
Tools > Device Settings > General > Set Date & Time
Set the date in either mm/dd/yy or dd/mm/yy or yy/mm/dd format, and enter
the correct date.
Set the correct time using either the 12 or 24 hour clock. Enter the time in the
Hour and Minutes fields and choose AM and PM as relevant, if it’s a 12 hour
clock.
NOTE: Any changes made to time or date will require the machine to be
rebooted before taking effect.
Greenwich Mean Time Offset
Select the required offset using the increase and decrease buttons to the left
and select Save when complete. Information for the GMT offset setting can
be found in the Quick Use Guide.