Xerox 3635MFP/S All in One Printer User Manual


 
12 Maintenance
Xerox Phaser 3635MFP User Guide 201
Cleaning the Machine
WARNING: When cleaning your machine DO NOT use organic or strong
chemical solvents or aerosol cleaners. DO NOT pour fluids directly onto
any area. Use supplies and cleaning materials only as directed in this
documentation. Keep all cleaning materials out of the reach of children.
WARNING: DO NOT use pressurised air-spray cleaning aids on or in this
equipment. Some pressurised air-spray containers contain explosive
mixtures and are not suitable for use in electrical applications. Use of
such cleaners can result in a risk of explosion and fire.
CAUTION: DO NOT remove the covers or guards that are fastened with
screws. You cannot maintain or service any of the parts that are behind
these covers and guards. DO NOT attempt any maintenance procedure
that is NOT specifically described in the documentation supplied with
your machine.
Document Glass and Constant Velocity Transport (CVT)
Glass
1. Use a soft, lint-free cloth,
lightly dampened with
water. Liquid should
never be poured directly
onto the glass.
2. Wipe clean the entire
glass area.
3. Wipe away any residue
with a clean cloth or
paper towel.
NOTE: Spots or marks on the glass will be reproduced on the prints when
copying from the document glass. Spots on the Constant Velocity Transport
Glass will show up as streaks on the prints when copying from the document
feeder.
The Control Panel and Touch Screen
Regular cleaning keeps the touch screen and control panel free from dust and
dirt. To remove finger prints and smudges, clean the touch screen and control
panel as below:
1. Use a soft, lint-free cloth, lightly dampened with water.
Document
glass
CVT glass